RDFWeb and Friend of a Friend (FOAF)

great hacks thank you

But variables get one benefit people do not

But some variables are immortal. These variables are declared outside of blocks, outside of functions. Since they don't have a block to exist in they are called global variables (as opposed to local variables), because they exist in all blocks, everywhere, and they never go out of scope. Although powerful, these kinds of variables are generally frowned upon because they encourage bad program design.

Inside each stack frame is a slew of useful information. It tells the computer what code is currently executing, where to go next, where to go in the case a return statement is found, and a whole lot of other things that are incredible useful to the computer, but not very useful to you most of the time. One of the things that is useful to you is the part of the frame that keeps track of all the variables you're using. So the first place for a variable to live is on the Stack. This is a very nice place to live, in that all the creation and destruction of space is handled for you as Stack Frames are created and destroyed. You seldom have to worry about making space for the variables on the stack. The only problem is that the variables here only live as long as the stack frame does, which is to say the length of the function those variables are declared in. This is often a fine situation, but when you need to store information for longer than a single function, you are instantly out of luck.

This code should compile and run just fine, and you should see no changes in how the program works. So why did we do all of that?

The Stack is just what it sounds like: a tower of things that starts at the bottom and builds upward as it goes. In our case, the things in the stack are called "Stack Frames" or just "frames". We start with one stack frame at the very bottom, and we build up from there.

Each Stack Frame represents a function. The bottom frame is always the main function, and the frames above it are the other functions that main calls. At any given time, the stack can show you the path your code has taken to get to where it is. The top frame represents the function the code is currently executing, and the frame below it is the function that called the current function, and the frame below that represents the function that called the function that called the current function, and so on all the way down to main, which is the starting point of any C program.

Since the Heap has no definite rules as to where it will create space for you, there must be some way of figuring out where your new space is. And the answer is, simply enough, addressing. When you create new space in the heap to hold your data, you get back an address that tells you where your new space is, so your bits can move in. This address is called a Pointer, and it's really just a hexadecimal number that points to a location in the heap. Since it's really just a number, it can be stored quite nicely into a variable.

This code should compile and run just fine, and you should see no changes in how the program works. So why did we do all of that?

That gives us a pretty good starting point to understand a lot more about variables, and that's what we'll be examining next lesson. Those new variable types I promised last lesson will finally make an appearance, and we'll examine a few concepts that we'll use to organize our data into more meaningful structures, a sort of precursor to the objects that Cocoa works with. And we'll delve a little bit more into the fun things we can do by looking at those ever-present bits in a few new ways.

When a variable is finished with it's work, it does not go into retirement, and it is never mentioned again. Variables simply cease to exist, and the thirty-two bits of data that they held is released, so that some other variable may later use them.

Let's take a moment to reexamine that. What we've done here is create two variables. The first variable is in the Heap, and we're storing data in it. That's the obvious one. But the second variable is a pointer to the first one, and it exists on the Stack. This variable is the one that's really called favoriteNumber, and it's the one we're working with. It is important to remember that there are now two parts to our simple variable, one of which exists in each world. This kind of division is common is C, but omnipresent in Cocoa. When you start making objects, Cocoa makes them all in the Heap because the Stack isn't big enough to hold them. In Cocoa, you deal with objects through pointers everywhere and are actually forbidden from dealing with them directly.

But some variables are immortal. These variables are declared outside of blocks, outside of functions. Since they don't have a block to exist in they are called global variables (as opposed to local variables), because they exist in all blocks, everywhere, and they never go out of scope. Although powerful, these kinds of variables are generally frowned upon because they encourage bad program design.

We can see an example of this in our code we've written so far. In each function's block, we declare variables that hold our data. When each function ends, the variables within are disposed of, and the space they were using is given back to the computer to use. The variables live in the blocks of conditionals and loops we write, but they don't cascade into functions we call, because those aren't sub-blocks, but different sections of code entirely. Every variable we've written has a well-defined lifetime of one function.

For this program, it was a bit of overkill. It's a lot of overkill, actually. There's usually no need to store integers in the Heap, unless you're making a whole lot of them. But even in this simpler form, it gives us a little bit more flexibility than we had before, in that we can create and destroy variables as we need, without having to worry about the Stack. It also demonstrates a new variable type, the pointer, which you will use extensively throughout your programming. And it is a pattern that is ubiquitous in Cocoa, so it is a pattern you will need to understand, even though Cocoa makes it much more transparent than it is here.

Each Stack Frame represents a function. The bottom frame is always the main function, and the frames above it are the other functions that main calls. At any given time, the stack can show you the path your code has taken to get to where it is. The top frame represents the function the code is currently executing, and the frame below it is the function that called the current function, and the frame below that represents the function that called the function that called the current function, and so on all the way down to main, which is the starting point of any C program.

When a variable is finished with it's work, it does not go into retirement, and it is never mentioned again. Variables simply cease to exist, and the thirty-two bits of data that they held is released, so that some other variable may later use them.

Let's take a moment to reexamine that. What we've done here is create two variables. The first variable is in the Heap, and we're storing data in it. That's the obvious one. But the second variable is a pointer to the first one, and it exists on the Stack. This variable is the one that's really called favoriteNumber, and it's the one we're working with. It is important to remember that there are now two parts to our simple variable, one of which exists in each world. This kind of division is common is C, but omnipresent in Cocoa. When you start making objects, Cocoa makes them all in the Heap because the Stack isn't big enough to hold them. In Cocoa, you deal with objects through pointers everywhere and are actually forbidden from dealing with them directly.

Since the Heap has no definite rules as to where it will create space for you, there must be some way of figuring out where your new space is. And the answer is, simply enough, addressing. When you create new space in the heap to hold your data, you get back an address that tells you where your new space is, so your bits can move in. This address is called a Pointer, and it's really just a hexadecimal number that points to a location in the heap. Since it's really just a number, it can be stored quite nicely into a variable.

For this program, it was a bit of overkill. It's a lot of overkill, actually. There's usually no need to store integers in the Heap, unless you're making a whole lot of them. But even in this simpler form, it gives us a little bit more flexibility than we had before, in that we can create and destroy variables as we need, without having to worry about the Stack. It also demonstrates a new variable type, the pointer, which you will use extensively throughout your programming. And it is a pattern that is ubiquitous in Cocoa, so it is a pattern you will need to understand, even though Cocoa makes it much more transparent than it is here.

Each Stack Frame represents a function. The bottom frame is always the main function, and the frames above it are the other functions that main calls. At any given time, the stack can show you the path your code has taken to get to where it is. The top frame represents the function the code is currently executing, and the frame below it is the function that called the current function, and the frame below that represents the function that called the function that called the current function, and so on all the way down to main, which is the starting point of any C program.

very nice

http://www.blackbananacasino.com
http://www.pokerinfo.net
http://www.golf4cash.com
http://www.societyhill-hotel.com
http://www.clubsyn.com
http://www.footcarecenters.net
http://www.bettorscasino.com